Replacement Handles For Windows
Double glazed windows are a very popular feature. Repair My Windows And Doors can wear down over time and become rusty or worn down.
You will have to know your current handle's spindle length as well as its fixings in order to replace it. This can be accomplished by examining the base of the previous handle.
Handle
Over time, uPVC window handles and locks can be damaged through wear and tear, accidental or intentional damage. It is possible that the lock or handle becomes difficult to open or close, or that they are not even locked. It's tempting to replace the entire window unit if this happens, but it is not always required. Most of the time, it's the scenario that a replacement handle or lock will suffice.
The most commonly used type of uPVC window handle is the espagnolette style. The handle has a spindle that extends from the handle and slot into a gearbox which operates the multipoint locking mechanism within the window. We stock a variety of locks and handles for all types uPVC window to ensure they function properly.
When replacing the uPVC window handle it is recommended to use screw cap caps to cover the screws to keep the screws secure and protect them from corrosion. Alternatively, it's possible to utilize a spacer or washer to ensure a better seal. A screw cap will stop water and debris getting into the handle, which can cause damage.
After you have removed the handle from the window, it's a good idea for you to clean the spindle and the threaded part of the bolt. This will make sure that the new handle is able to fit and function well, and it will also keep any dirt from entering the multipoint lock.
It's now time to put in the new uPVC handle. It's important that you adhere to the directions that came by the handle you have purchased, and to take a look at the old one before you begin to have an idea of how to do it correctly. Most of the time, the process is simple. However, if you experience any difficulties that aren't covered in this guide, it's best to contact our team for further guidance.
It is important to note that when replacing an uPVC cockspur (also called Espag handle) you'll require the height of the steps of your window to determine the correct size handle. The step height is the distance from the frame or base of the window to the point at which the cockspur's nose handle rests when it is put in place.
Hinges
The hinges may not be in line with the frame of the window If your windows begin to open and close with a visible space. It's usually a straightforward fix that can be resolved by replacing the hinges. We have a variety of options and customise the dimensions of the hinges to fit your needs.
If you have a standard wooden or upvc window, we have a wide range of different types of window hinges. These hinges are available in different colours to match the existing window frames. They also come with all the fixings required to set them up. We can provide repair screw packs for double glazed windows using older style hinges. This will allow you to cut the old thread back into the frame.
We offer a range of hinge styles including standard casement window hinges that can be used with a standard or tilt and turn handle, through to fire escape egress hinges that are suitable for use on larger side-hung windows. These hinges are designed to fully open in the event of an emergency and have an easy-cleaning position. We also carry hinges with restricted-egress that are designed to restrict the opening angle of windows to a maximum of 100mm. This is ideal for households with children.
The sound of a hinge squeaking could indicate that the hinges need to be replaced. This is usually caused by metal friction against metal. If the noise continues, a small amount of lubricant will aid.
Plumb windows help avoid optional binding, which means that the operating sash of the window is line with the frame, ensuring that it closes and opens properly. A window that is not plumb can start to close and open without difficulty, or it could become warped over time which can affect the seal as well as the appearance of the window.
When purchasing replacement upvc window hinges, you should be aware that they are available in either imperial or the metric sizes. The sizes in metric are more precise, but this isn't really noticeable when they are installed. The first corner holes on the track are standard, however, the rest of the holes may differ based on the hardware used originally. We suggest that you take measurements of the spacing of holes on your existing frame prior to purchasing any upvc hinges to ensure that they are of the correct dimensions.
Crank
The normal wear and tear that happens over time can result in damage to the window handle, lock or crank mechanism. This can make it more difficult to open and close your windows. It could also affect their security. If your window is difficult to open or shut, or if you hear a clicking sound when you turn the handle, it could be a sign you need to replace the mechanism. If you're not able to lock your window or the multipoint lock is damaged, it may also be worth considering replacing this piece of hardware too.
A new window crank can be replaced with little effort, but it's crucial to buy the correct size replacement. You can determine if the replacement has the exact same height of step as the old one by measuring the distance from the crank arm guide bushing to the notch on the track at the bottom of the frame. You can also measure the length of the spindle that is on your existing handle to determine what size you require to get a replacement.
The type of handle that is fitted to your window will determine the type of crank mechanism you need for your casement and awning windows. Espag handles have a spindle that is a mental component on the back that is connected to the frame of the window and drives the window mechanism, while cockspur handles have pegs that are held in place by screws of three or four that are inserted into the sash and frame.
It's easy to replace your window operator once you've found the appropriate replacement. Remove any screws that attach to the trim from the casement cover and carefully lift the cover off to expose the insides of the window operator (Photo 1). Remove any trim screws that are rusted and then check the operating lever with the previous to make sure they are in line. Then, screw the new lever to the window frame, replace any screws that were rusted or bent, then put the casement cover back over the mechanism.